shale shaker screen, Author at Shale Shaker Screen,Shaker Screens for Sale,Shale Shaker Screen Manufacturers

2021年12月29日2021年12月29日

The function and classification of KOSON mud guns

KOSON mud gun relies on the high-pressure fluid flow in the mud pipeline to generate high-pressure jet impact force through the nozzle of the mud gun to flush the sediment at the bottom of the drilling mud tank to make it suspended.

The main function of the KOSON mud gun is: auxiliary mud agitator, right the corners of the mud tank, the bottom edge of the mud tank and the deposits of the suction ports of each pump are prevented from depositing, and then the agitator is used for uniform mixing. After the agitator stops running for a period of time, the agitating impeller will be buried by the deposited sediment. Before it needs to be re-run, the KOSON mud gun can reduce part of the resistance when the agitator is started, which provides a guarantee for normal operation.

KOSON mud gun is divided into high-pressure gun and low-pressure gun. Because the high-pressure mud gun is a tributary supply of drilling pump, its pressure level can reach 1～6MPa; as for the low-pressure gun, it is supplied by sand pump, and its working pressure level is 0.2 ~0.3MPa. In general, the number of KUSON mud guns should be determined according to the number of mud mixers.

KOSUN- China Solids Control Leader&Drilling Waste Management Expert
Email: sales2@adkosun.com
WhatsApp/Wechat:+86 18792396268
Contact person: Lily Wang
Online consulting:
http://www.kosun.com
http://www.kosuneco.com

2021年12月22日2021年12月22日

What are the characteristics of oil and gas reservoir drilling fluid?

Oil and gas reservoir drilling fluid is the “blood” of drilling and plays a very important role in drilling operations. Therefore, the requirements for drilling fluid are very high, according to the characteristics of different oil and gas layers, matching different types of drilling fluids. This article roughly summarizes the following four types of oil and gas reservoir drilling fluids and the characteristics of oil and gas reservoir drilling fluids.

1) Oil and gas reservoir drilling fluid-water-based drilling fluid

Water-based drilling fluid refers to the general term of various circulating fluids that meet the needs of drilling work with its multiple functions during oil and gas drilling.

Features of water-based drilling fluid: Low cost, Simple slurry preparation, Relatively low pollution.

2) Oil and gas reservoir drilling fluid-oil-based drilling fluid

Oil-based drilling fluid features: good lubricity, little damage to oil and gas layers, and good for stabilizing the borehole wall. It is widely operated on various drilling platforms. Oil-based drilling fluid also has the characteristics of resistance to high temperature, salt and calcium erosion.

3) Gas drilling fluid is formed by injecting air or nitrogen into conventional drilling fluid. Characteristics of gas drilling fluid: Compared with ordinary drilling fluids, it has the advantages of fast speed, short cycle and low overall cost.

4) Oil and gas reservoir drilling fluid-synthetic base drilling fluid

Synthetic-based drilling fluids are often characterized by easy biodegradation, no pollution to the environment, and pollution discharge standards that meet national environmental protection requirements; the filtrate is the base fluid instead of water, which has good performance in stabilizing the well wall and protecting oil layer gas; the conventional performance is stable, easy to control and operate, the liquid phase has a high viscosity, which is good for suspending and carrying drill cuttings, and has high thermal stability, which can still meet the needs of carrying cuttings at high temperatures.

2021年11月29日2021年11月29日

The composition and physical treatment method of drilling waste

The composition of drilling waste is complex, generally alkaline, with a pH value of 8. 5-12, and the solid particle size is generally 0.01 to 0.3 μm. The appearance is generally viscous fluid or semi-fluid, with fine particles and grades. Various chemical treatment agents are added to it, generally containing heavy metals, oils, bentonite, alkalis and compounds (including organics), etc., such as iron chromium salt, sulfonated pitch, sulfonated tannin extract, sulfonated lignite, etc. Livestock and environmentally harmful substances. Waste fluids are produced in the process of oilfield exploration and development, such as cleaning fluids, drilling fluids, and sewage (formed by rainwater washing the well site with some mud and oily substances). The harmful substances are mainly oily substances, and there are also a small amount of them. Organic treatment agents, heavy metals and alkali substances have higher CODCr values. During the drilling process, the mud circulates in the drill bit to lubricate the drill bit while also carrying the drill cuttings to the ground. Most of the drill cuttings are solid particles, and a small part is mixed in the drilling fluid in the form of mud sand, accounting for about 20% of the total waste. Contaminants are mainly drilling fluid.

At present, domestic and foreign drilling waste treatment methods mainly include chemical and physical methods such as chemical flocculation, solidification, washing, incineration, destabilization, and landfill. After chemical flocculation treatment, it can be directly discharged in accordance with environmental protection requirements, or be recycled to prepare mud, or injected into wells, but it lacks efficient and economical flocculants, and the harmful substances after chemical solidification are no longer diffused and migrated to the environment. The solidification treatment requires a certain cost, and the amount of one-time treatment is large. The landfill method has an adverse effect on the surface water and its irradiated soil. The incineration method has a high treatment cost and will cause secondary pollution to the air. Although these methods have processed the drilling waste mud to a certain extent, the organic pollutants in the drilling waste mud have not been decomposed and may still pollute the environment.

2021年10月31日2021年10月31日

Parameters of KOSUN KSMR-1000 HDD Mud Circulation System

Parameters of KOSUN KSMR-1000 HDD Mud Circulation System:

System Capacity: 1000GPM (240m³/h)

Particle Size after Treatment: 15~44μm

Total Screen Area of Shale Shaker: 2*2m2

Total Screen Area of Underflow Shaker: 2m2

Processing Stage: three stages

Total System Power: 184kW

Total System Volume: 30m³

External Dimensions of the System: 12100×2630×4438mm

KOSUN KSMR-1000 HDD Mud Circulation System is applied to construction projects with higher mud capacities. Its purification process is divided into three stages: shale shaker for the first stage, desander and desilter respectively for the second and third stages. Both desander and desilter are equipped with underflow shakers that can carry out a further treatment to solids discharged by the upper equipment. By mud preparation devices, add necessary mud materials into purified mud and stir them evenly to prepare mud with qualified properties for recycling, which can greatly reduce construction costs and effectively protect the environment.

KOSUN produces standard HDD Mud Recycling System, such as KSMR-200, KSMR-500, and KSMR-200. KOSUN can also customize exclusive mud recovery systems according to the different needs of customers.Want know more about our Standard Trenchless HDD Mud Circulation System, Please Contact us now!

2021年9月30日2021年9月30日

Mud treatment equipment can control the specific gravity and viscosity of the mud

Mud treatment equipment is a kind of pile foundation auxiliary machine that can control the mud performance index in the construction of mud wall protection. It can achieve strict control of the specific gravity, viscosity and sand content of the mud. This type of equipment can be used for mud purification treatment. The mud waste produced in the purification process is subjected to dry discharge treatment, and the treated mud can be recycled and reused, so the transportation and treatment cost of construction mud can be greatly saved.

The mud can be used as a lubricating and cooling agent in the construction of the pile foundation between the use of mud and processing equipment. It can cool the tools while washing the tools, prevent the wall from collapsing or peeling, and maintain the dug shape unchanged. In addition, when the construction pile hole is poured, the quality of the mud will also affect the end bearing effect of the cast-in-place pile. Therefore, according to the different construction process requirements, certain standards and requirements for the quality of the mud will inevitably be put forward in the mud making process. Therefore, in the process of mortar making, how to stably control the sand content and specific gravity of the mud has become a key factor in controlling the hole formation and pile quality of cast-in-place piles.

As a high-efficiency and energy-saving construction mud purification and reuse device, mud treatment equipment has obvious technical and economic advantages in terms of the quality of construction slurry and the cost of waste slurry treatment. High comprehensive benefits are produced in terms of quality assurance and pulp cost.

2021年8月18日2021年8月18日

Specifications for electric motors in mud agitator

The motors in the mud agitator all use explosion-proof T-frame, 3-phase 230～460V, 1150 rpm, frequency 60 Hz; or 3-phase 190～380V, 958 rpm, frequency 50 Hz. Flexible coupling for motor The joint is directly connected with the reducer. A strong steel passport is mounted above the connecting shaft.

The solid mild steel shaft is connected to the reducer with a rigid coupling. In order to adjust the height of the impeller, a keyway is opened in the lower part of the shaft. The diameter of the shaft ranges from 38.1 mm to 88.9 mm, depending on the model, and the actual length of the shaft is determined by the user.

How to calculate the size and number of mud agitators

In the equipment currently in use, it is very likely that 75% of the mud agitators are installed improperly. The reason for this situation is either not understanding the correct size determination method, or not understanding the importance of selecting the size reasonably. The reasonable stirring amount calculated by each agitator is related to the given power and impeller diameter. The relationship between the mixing range that the impeller can reach and the specific gravity of the mud and the required power can be determined by calculation.

2021年7月25日2021年7月25日

Oil-based Mud Zero Discharge system treatment process

KOSUN Oil-based Mud Zero Discharge system processing process: the drilling fluid mud to be processed is transported to the cuttings dryer, the processed drilling fluid mud is transported to the drilling fluid centrifuge for further processing, and the mud after the drilling fluid centrifuge is processed, the liquid is reinjected into the mud circulation system, and the treated solid waste is transported to the cuttings box. The equipment of KOSUN Oil-based Mud Zero Discharge system mainly includes: drill cuttings dryer, decanter centrifuge, screw pump, screw conveyor, cuttings box, etc.

KOSUN is a professional manufacturer of drilling waste mud Zero Discharge treatment systems. Customers are welcome to inquire about drilling waste and mud Zero Discharge treatment systems. KOSUN will provide customers with satisfactory waste treatment system technolog, Programs and services.

KOSUN Drilling Waste Treatment System is also known as the Zero Discharge mud system and the non-floating mud processing system while drilling. It is divided into: Water-based Mud Zero Discharge treatment system and Oil-based Mud Zero Discharge system according to its purpose.

2021年6月15日2021年6月15日

Features of Engineering Slurry Separation System

Main features of Engineering Slurry Separation System:

1. The whole machine has a large slurry processing capacity, reaching 200m3/h and 500m3/h, with high purification and sand removal efficiency, and the separation particle size d50=0.060mm.

2. Simple operation, low failure rate, easy installation and use.

3. The sieved ballast material has a good dehydration effect.

4. Adjustable shale shaker’s exciting force, screen angle and screen hole size can maintain a good screening effect.

5. The shale shaker has high screening efficiency and can be adapted to the drilling footage of various drilling rigs in different formations.

6. It can be moved and used at will.

The function of the Engineering Slurry Separation System is to separate and treat the slurry water formed by the shield cutting, and then pump the recovered mud into the adjustment tank. The function of the shale shaker is to pre-treat the slurry water and remove the bulk and lumps particle. The separation of coarse particles adopts multi-layer shale shaker to meet the requirements of on-site use of mud particles. During the treatment process, particles larger than the mesh number of the screen are excluded from the system and flow into the sedimentation tank.

The Engineering Slurry Separation System is mainly suitable for geology, hydropower, urban construction, bridge pile foundations, etc. It is a necessary equipment for basic civilized construction. The sufficient purification of the mud is beneficial to control the performance indicators of the mud, sticking accidents, hole making, and the separation of mud and water from the ballast soil, which is beneficial to the efficiency of hole making, the reuse of the mud, and cost saving.

2021年5月30日2021年5月30日

Drilling waste treatment system realizes mud zero-discharge treatment

How to make the use of mud safe, environmentally friendly and save money has always been a major course in drilling production.

Problems encountered at the drilling site: Mud is called “drilling blood”. Oil-based mud mixed with oil, water, organic clay and chemicals can effectively reduce frictional resistance, reduce accident rates, and improve well quality , It is widely used in the construction of horizontal wells and deep vertical wells. In recent years, the use of oil-based mud by drilling crews has increased, and the consequent increase in costs and safety and environmental protection issues have become increasingly prominent. In addition, due to the lack of oil-based mud and cuttings processing equipment, drilling engineering companies are very passive in bidding for foreign projects. Therefore, the drilling waste treatment system just solves this problem.

After the discarded drilling mud and cuttings are returned from the wellhead, they directly enter the device, and are conveyed to the cuttings dryer through the sealed long pipe-screw conveyor, and are rotated by the dryer and filtered by the screen. Most of the dried cuttings are discharged from the first sand outlet along another screw conveyor, and the remaining liquid mud is pumped into the centrifuge to be subdivided, and the fine cuttings are finally separated Discharge from the second sand outlet. At the same time, the treated mud is re-injected into the mud tank through the pipeline and recycled again.

2021年3月28日2021年3月28日

Factors Affecting the Use Effect of Decanter Centrifuge

The decanter centrifuge is mainly composed of a rotating drum, a spiral, a differential system, a liquid level baffle, a driving system and a control system. It is a special equipment for solid-liquid separation designed for the characteristics of petroleum drilling fluids. It can complete various processes such as feeding, centrifugal sedimentation, and unloading at full speed. It is mainly used to recover barite, remove fine solids, and reduce drilling fluids. The solid content of the drilling fluid controls the density and viscosity of the drilling fluid, ensures the performance of the drilling fluid, and plays an important role in rapid drilling.

Factors Affecting the Use Effect of Decanter Centrifuge

The use effect of the decanter centrifuge is divided into adjustable factors and non-adjustable factors. Now we will explain them separately. If we understand the principle of action, we can effectively control it in use. The unadjustable mechanical factors include: drum diameter and effective length. Drum half cone angle. Pitch. Screw type. Adjustable mechanical factors are: drum speed, differential speed (difference ratio), liquid ring layer thickness, process factor.

There are many factors that affect the dewatering effect of the decanter centrifuge, and each factor affects each other. Therefore, the treatment effect is the result of the combined effects of the above-mentioned factors. The selection of the centrifuge should be carried out in accordance with the actual situation of the project, and the operating parameters should be adjusted. It should be considered comprehensively from the expected mud cake moisture content, solid content and economic efficiency required by the disposal method of the dehydrated mud cake.